Qingdao Huashida Machinery Co.,Ltd

Catalogue

Contact US

Address: Digital Technology Center A1210, Haier Road, 63rd, Laoshan District, Qingdao City, Shandong Province

TEL: +86-532-8099-9083

FAX : +86-532-8099-9083

Email: sales@qdhsd.com 

       

Pipeline Weld Joints Heat Shrink Sleeve

Pipeline Weld Joints Heat Shrink Sleeve

Pipeline Weld Joints Heat Shrink Sleeve Introduction PE heat shrinkable tape (sleeve) is composed of cross-linked polyethylene back and special heat melt adhesive. Heat melt adhesive has good bonding with PE back, steel pipe and Fusion bonded epoxy (FBE layer). By heating PE back shrinks,...

Chat Now

    横幅-创新以远.jpg

    Pipeline Weld Joints Heat Shrink Sleeve


    Introduction
    PE heat shrinkable tape (sleeve) is composed of cross-linked polyethylene back and special heat melt adhesive. Heat melt adhesive has good bonding with PE back, steel pipe and Fusion bonded epoxy (FBE layer). By heating PE back shrinks, adhesive layer melts, and closely wraps around pipe joints, then it forms together with FBE a firm and continuous anti-corrosion body. It is resistant to corrosion, wear, impact, UV and aging, easier to be operated. 

    热收缩套1.jpg 微信图片_20180329143331.jpg

    Wraparound products
    Application area:
    It is mainly used for wrapping around pipe, anti-corrosion of kinds of pipe joints, and repairing pipes.
    For example: Oil and gas pipe, PU insulation pipe, 3PE/2PE steel pipe.
    用途:塑钢管.jpg

    用途:检查井.jpg

    用途:PVC.jpg 
     
                               CONSTRUCTION CASE
    Heat shrinkable sleeve for Oil & Gas Pipe 

    用途:3PE管.jpg

    Heat shrinkable sleeve forThermo Insulated Pipe

    热收缩套施工1.jpg

     TECHNICAL PARAMETERS

    NOText ItemUnitPerformanceText ResultText Metho
    Back Material
    1Tensile StrengtMPa1719.47ASTM D638
    2Elongatio%400626ASTM D638
    3Vicat Softening PoinºC9092ASTM D1525
    4Brittleness TemperaturºC<-65<-65ASTM D2671C
    5Dielectric StrengtMV/m2533.13ASTM D149
    6Volume ResistivitΩ.m1*10131.1*1013ASTM D257
    7Environment Stress Crach1000>1000GB/T1842
     
     
    8
     
    Chemical
    resistance
    (7d
    10%
    HCI
    Tensile strengthMPa85104.9ASTM D638
    Elongation%8596.3ASTM D638
    10%
    NaAH
    Tensile strengthMPa85102.1ASTM D638
    Elongation%8595.6ASTM D638
    10%
    NaCL
    Tensile strengthMPa85108.3ASTM D638
    Elongation%8594.1ASTM D638
    9Thermal aging
    (150ºC,168h
    Tensile strengthMPa1420.7ASTM D638
    Elongation%300630ASTM D638


    NO.Text IteUniPerformancText ResulText Metho
    Adhesive
    1Softening PoinºC9090.1ASTM E28
    2Brittleness TemperaturºC<-15<-15ASTM D2671C
    3Lap SheaMPa1.01.5ASTM D1002
     
    4
    Peel Strength
    (22ºC
    SteelN/cm70145.6ASTM D1000
    PrimerN/cm70205.9ASTM D1000
    PE layeN/cm70190.0ASTM D1000
    Non-solvent Epoxy Primer
    5Shear of cured primerMPa5.012SY/T0041


    We are also producing machine of heat shrinkable sleeve, You are welcom to ask for more information. 

    2.jpg

    横幅-认证图标.jpg

    Huashida Machinery, with over 14 years' experience, is one of the professional pipeline weld joints heat shrink sleeve manufacturers in China. Offering the customized service, we warmly welcome you to get the high qualified products from our factory.
Hot Tags: pipeline weld joints heat shrink sleeve, China, manufacturers, factory, customized, high qualified
Related Products
Inquiry