Qingdao Huashida Machinery Co.,Ltd

Catalogue

Contact US

Address: Digital Technology Center A1210, Haier Road, 63rd, Laoshan District, Qingdao City, Shandong Province

TEL: +86-532-8099-9083

FAX : +86-532-8099-9083

Email: sales@qdhsd.com 

       

Heat Shrinkable Sleeve Tape For Oil-gas Pipeline

Heat Shrinkable Sleeve Tape For Oil-gas Pipeline

Heat shrinkable sleeve for oil-gas pipeline Heat shrinkable sleeve , which is developed and manufactured by Qingdao Huashida machinery Co. , Ltd for anti-corrosion of pipeline. The hot melt adhesive is squeezed into the joint by the shrink power to form a perfectly sealed surface, after being...

Chat Now

    Heat shrinkable sleeve for oil-gas pipeline

    Heat shrinkable sleeve , which is developed and manufactured by Qingdao Huashida machinery Co., Ltd for anti-corrosion of pipeline. The hot melt adhesive is squeezed into the joint by the shrink power to form a perfectly sealed surface, after being heated. HSSC-1 is compatible with standard pipe coating, also can be used for coating bare, replacement pipe section and large redius.

    主图:产品1 (2).jpg


    Why does the Heat shrinkable sleeve of "Huashida" have the better adhesion for anti-corrision pipe (3PE)? First let us introduce for you the Construction of anti-corrision pipe (3PE).

    layer system (3PE):

    - First layer: Liquid epoxy.

    - Second layer: Heat melt adhesive.

    - Third layer: Radiation cross-linked, high density polyethylene film.

    示意图 (2).jpg



    This system is a wrap-around heat shrinkable sleeve which replicates the structure and performance of mill-applied three-layer PE coatings.

    During installation, the epoxy is applied to the prepared pipe surface and the heat shrinkable sleeve is immediately wrap around the joint over the wet epoxy. Heat is then applied to the sleeve which shrinks to form a tight fit around the joint. While curing, the epoxy forms strong mechanical and chemical bonds to the pipe surface & to the copolymer adhesive layer. The radiation cross linked outer layer forms a tough barrier against mechanical damage and moisture transmission.

    IMG_0020 - 600 (2).jpg


    弯头 (2).jpg


    Reamark: The thickness mainly according to the buyer’s requirements.



    ITEM

    Standard

    UNIT

    Data

    Adhesive

    softening point

    ASTM E 28

    °C

    70-80

    shear strength

    DIN 30 672

    N/cm

    ≥100

    Basic

    specific density

    ASTM D792

    r/cm3

    0.935-0.96

    tensile strength

    ASTM D638

    Mpa

    15-20

    Elongation at break

    ASTM D792

    %

    350

    hardness

    ASTM D2240

    ball

    48

    Heat Shrinkable Sleeve

    peel strength

    ASTM D1000

    N/cm

    >150

    water-intake rate

    ASTM D570

    %

    0.05


    Qingdao Huashida, the industry leader in corrosion protection and sealing inCHINA. Welcome to ask us more information.

    综合-热收缩带生产线.gif







    Huashida Machinery, with over 14 years' experience, is one of the professional heat shrinkable sleeve tape for oil-gas pipeline manufacturers in China. Offering the customized service, we warmly welcome you to get the high qualified products from our factory.
Hot Tags: heat shrinkable sleeve tape for oil-gas pipeline, China, manufacturers, factory, customized, high qualified
Related Products
Inquiry