Qingdao Huashida Machinery Co.,Ltd

Catalogue

Contact US

Address: Digital Technology Center A1210, Haier Road, 63rd, Laoshan District, Qingdao City, Shandong Province

TEL: +86-532-8099-9083

FAX : +86-532-8099-9083

Email: sales@qdhsd.com 

       

District Heating Pipes HDPE PU Thermal Insulation Outer Casing Pipe Extrusion Production Line

District Heating Pipes HDPE PU Thermal Insulation Outer Casing Pipe Extrusion Production Line

HDPE PU Thermal insulation Outer Casing Pipe Extrusion Line --- Pipe diameter range: 365-760mm 500-960mm 855-1380mm 960-1680mm ---The extrusion line comprise equipments and devices as below, 1set Vacuum loader 1set Hopper dryer 1set High-effeciency single screw extruder 1set 25/25 single screw...

Chat Now

    HDPE PU Thermal insulation Outer Casing Pipe Extrusion Line

    ---Pipe diameter range: 365-760mm 500-960mm 855-1380mm 960-1680mm
    ---The extrusion line comprise equipments and devices as below,
        1set   Vacuum loader 
        1set   Hopper dryer
        1set   High-effeciency single screw extruder
        1set   25/25 single screw extruder for mark line 
        1set   Vacuum calibration table 
        1set   Water spraying tank 

        1set   Hauling machine
        1set   Cutting machine
        1set   Stacker

     
    I. Pipe Usage
    ---HDPE jacket pipe is out case of thermal insulating pipe, which is widely used in central heating, oil, nature gas and other industrial area. 


    II. Machine Advantages
    ---High-efficiency extruder gives larger output, stable performance. 
    For example
    SJ90/33---600-700kg/h 
    SJ120/33---800-900kg/h
    SJ150/33---1000-1200kg/h
    ---Compared with inflating method (internal pressure method)
    1. For 24 hours working, it reduces 2-3 workers for each shift.
    2. There is much waste pipe and material, no need workers to crush waste          material. 

    3.  High-effeciency. Take Dimater 960mm as an example, Output is approximately 60 pcs of 11.6meters pipe, it is much higher output than that of inflating method. 
    4. Pipe wall is average and smooth, to reduce waste of raw material, and pipe thickness is adjustable.
    5.  No need trim edge, once forming. 

    未标题-1.jpg


    III. Main machine- High-effeciency single screw extruder
    ---Single screw is with barreir & mixing head; barrel is new model with slotting (channel), Both make security of good jellification, large output and stable performance.



    IV. Controlling system 
    The complete line could be controlled by PLC, with good human-machine interface, all technical parameters could be set and indicated by touching screen. Controlling system is designed according to the customer;s requirement, to be with PLC, or without.   


    V. Electrical system
    ---ABB frequency converter or EUROTHERM speed controller
    ---Japan RKC temperature controller
    --- SIEMENS AC contactors

    未标题-3.jpg

    未标题-2.jpg



    StylePE-365/760PE-420/960PE-850/1372PE-960/1680
    Main extruder SJ-90/33SJ-90/33SJ-120/33SJ-150/33
    Pipe diameter Φ365-960mmΦ 420-Φ 960 mmΦ 850-Φ 1372 mmΦ 960-Φ 1680mm
    Capacity 550-700kg/h550~700 kg/h700~900 kg/h 800-1200kg/h
    Installed power 360kw380 kw440 kw 580kw
    Length 35m36 m40 m 48m


    Huashida Machinery, with over 14 years' experience, is one of the professional district heating pipes hdpe pu thermal insulation outer casing pipe extrusion production line manufacturers in China. Offering the customized service, we warmly welcome you to get the high qualified products from our factory.
Related Products
Inquiry